Compact design diaphragm seal pressure gauge_P701 series
P701 series
Service intended
P701 series are designed for diaphragm seal to be combined with a pressure gauge. It is suitable for corrosive, contaminated, hot or viscous pressure media in chemical and food process.
Design | Internal diaphragm, upper and under flange welded no sealing and compact design |
Accuracy | P2522 (63 mm) and P2523 (80 mm) : ±1.6% of full scale P2524 (100 mm) : ±1.0% of full scale |
Scale range (MPa, kPa, bar) | -0.1 ~ 0 to -0.1 ~ 2.4 Mpa 0 ~ 0.1 to 0 ~ 25 Mpa |
Filling liquid | Silicone oil |
Working pressure | Steady : 75 % of full scale (63 and 80 mm) 100 % of full scale (100 mm) Over range protection : 130 % of full scale |
Working temperature | Ambient : -20 ~ 65 °C Fluid : Max. 100 °C |
Degree of protection | EN60529/IEC529/IP65 |
Temperature effect | Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale |
Standard features
Pressure connection (Gauge side) | Stainless steel (316SS) |
Diaphragm | 316L SS, Hastelloy-C, Tantalum, Monel |
Diaphragm outer diameter | 40 or 48 mm |
Under flange (Process side) | 316SS, 316L SS, Monel, Hastelloy-C |
Process connection | ¼", ⅜", ½" PT, NPT and PF ¼" PT and NPT (F) |
Đồng hồ đo áp suất P701 series Wise Vietnam
Bình luận của bạn
Danh mục sản phẩm
- Ashcroft
- AT2E
- MARK 10
- BIHL WIEDEMANN
- SPOHN BURKHARDT
- Schenck Process
- Baumuller
- CS Instruments
- COMET SYSTEM
- KELLER-ITS
- Guenther
- GEMU
- KOGANEI
- MATSUSHIMA
- NIRECO
- OHKURA
- Redlion
- SHINHO SYSTEM
- TDK LAMBDA
- Teclock
- SITEC
- TERACOM
- Tektrol
- Medenus
- EPI Flowmeter
- Okazaki
- Ulticell
- Netter Vibration
- MINIMAX
- KRACHT
- HELUKABEL
- THIẾT BỊ KHÁC
Hỗ trợ trực tuyến
Liên hệ tư vấn mua hàng
Liên kết website
Thống kê truy cập
-
Trực tuyến:1
-
Hôm nay:526
-
Tuần này:2157
-
Tháng trước:6830
-
Tất cả:1460259
Video Clip