High temperature service pressure gauge_P740 series
P740 series
Service intended
P740 series have diaphragm seal to be combined with a pressure gauge, and measure the melted plastics, fiber, and synthetic under high pressure. It is suitable to be used for the situation where corrosive, contaminated, hot and viscous pressure mediums are present during the chemical or food process.
Pressure range (MPa, bar) | Refer to range table Depending on diaphragm size and process conditions |
Accuracy | ±1.0 % of full scale |
Filling liquid | Silicone oil |
Working temperature | Ambient : -20 ~ 65 ℃ Fluid : Max. 300 ℃ |
Temperature effect | Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale |
Standard features
Process connection | ¾" PF and 1" PF male screw |
Body | Stainless steel (316SS) |
Diaphragm | Stainless steel (316L SS) |
80, 150 and 300 mm | |
Certificates | ATEX Ex II GD c IIC TX |
Đồng hồ đo áp suất P740 series Wise Vietnam
Bình luận của bạn
Danh mục sản phẩm
- Ashcroft
- AT2E
- MARK 10
- BIHL WIEDEMANN
- SPOHN BURKHARDT
- Schenck Process
- Baumuller
- CS Instruments
- COMET SYSTEM
- KELLER-ITS
- Guenther
- GEMU
- KOGANEI
- MATSUSHIMA
- NIRECO
- OHKURA
- Redlion
- SHINHO SYSTEM
- TDK LAMBDA
- Teclock
- SITEC
- TERACOM
- Tektrol
- Medenus
- EPI Flowmeter
- Okazaki
- Ulticell
- Netter Vibration
- MINIMAX
- KRACHT
- HELUKABEL
- THIẾT BỊ KHÁC
Hỗ trợ trực tuyến
Liên hệ tư vấn mua hàng
Liên kết website
Thống kê truy cập
-
Trực tuyến:2
-
Hôm nay:187
-
Tuần này:2366
-
Tháng trước:7039
-
Tất cả:1460468
Video Clip