Flush diaphragm type pressure gauge_P757 series
P757 series
Service intended
P757 series have diaphragm seal to be combined with a pressure gauge. These series are suitable to be used for the situation where corrosive, contaminated, hot, and viscous pressure mediums are present such as a chemical and food process.
Nominal diameter | 63, 80 and 100 mm |
Accuracy | 63 and 80 mm : ±1.6 % of full scale 100 mm : ±1.0 % of full scale |
Scale range (MPa, kPa, bar) | Refer to pressure unit and range table Depending on diaphragm size and process conditions |
Working pressure | Steady : 75 % of full scale Over range protection : 130 % of full scale |
Working temperature | Ambient : -20 ~ 65 °C Fluid : Max. 100 °C |
Temperature effect | Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale |
Standard features
Body | Stainless steel (316SS) |
Process connection | Stainless steel (316SS) Screw connection |
Diaphragm | Stainless steel (316L SS) |
Certificates | ATEX Ex II GD c IIC TX |
Đồng hồ đo áp suất P757 series Wise Vietnam
Bình luận của bạn
Danh mục sản phẩm
- Ashcroft
- AT2E
- MARK 10
- BIHL WIEDEMANN
- SPOHN BURKHARDT
- Schenck Process
- Baumuller
- CS Instruments
- COMET SYSTEM
- KELLER-ITS
- Guenther
- GEMU
- KOGANEI
- MATSUSHIMA
- NIRECO
- OHKURA
- Redlion
- SHINHO SYSTEM
- TDK LAMBDA
- Teclock
- SITEC
- TERACOM
- Tektrol
- Medenus
- EPI Flowmeter
- Okazaki
- Ulticell
- Netter Vibration
- MINIMAX
- KRACHT
- HELUKABEL
- THIẾT BỊ KHÁC
Hỗ trợ trực tuyến
Liên hệ tư vấn mua hàng
Liên kết website
Thống kê truy cập
-
Trực tuyến:2
-
Hôm nay:528
-
Tuần này:2159
-
Tháng trước:6832
-
Tất cả:1460261
Video Clip