Paper Checker PC300, PC210 Nireco - Nireco Vietnam

Chia sẻ:

Số lượng

For a wide range of materials: Paper, Aluminum Laminate, Poly-Laminate, Plastic

The Paper Checker series can be used as a double-sheet detector for sheet-fed presses, as well as a web splice or break detector. These products can be used for a wide range of materials including paper, aluminum laminate, poly-laminate, and plastic.

PC300

The Paper Checker PC300 and UH300 are a double-sheet feed detector developed specially for sheet-fed presses. Besides paper, it can also be used with aluminum laminate, poly-laminated paper, plastics and a number of other materials. It can also handle a wide range of thickness, and the thickness in use can be simply selected from a switch on the operation panel for easy changeovers. PC300 can detect double sheets of any material and prevents double sheets from being fed at once due to operator errors or omissions.

PC210

The Paper Checker PC210 and UH200 detect a splice or breakage of a web in every process of a web. In addition, it detects the feeding of double sheets by a sack machine which should feed one sheet at a time. When an abnormality is detected in each application, it is indicated on the controller and the output relay is activated. This contact causes the alarm buzzer to sound and the alarm indicator to light, thus notifying the operator or stopping the operation.

PC300(Controller), UH300(Sensor)
Detecting method	Non-contact detecting system
Application	Double-sheet detector for sheet-fed press
Material type	Paper, aluminum laminate, poly-laminate, plastics Material thickness: 0.04 to 1.0mm
Input	Synchronous signal, output reset signal
Operating speed	15000sph (max)
Power supply	100 to 240V AC, 50/60Hz
Power consumption	10VA (max)
Mess	Controller 2kg, Sensor 0.4kg (one pair, including cables)
Ambient temp.	0 to 50℃

PC210(Controller), UH200(Sensor)
Web splice detection
Web thickness	1μm to 0.8mm
Splice width	20mm or more
Line speed	1000m/min or less
Inter-lock input	a-contact, rating: 5V DC, 10mA
Web break detection
Web thickness	50μm to 0.8mm
Line speed	1000m/min or less
Double-sheet feed detection
Sheet thickness	15μm～0.8mm
Common specifications
Power supply	100 to 240V AC, 50/60Hz
Power consumption	10VA
Contact output	C-contact Rating : 240V AC, 0.1 A 24V DC, 0.1 A
Weight	Controller: 2kg Sensor: 0.5kg (one pair)
Cable length	5 meter each
Ambient temperature	0 to +50℃